Slip On Flanges

We are kept an eye on fundamental expert in making raised need nature of Slip-on ribs. Slip-on pipe spines if all else fails slips over the line. Slip on pipeflanges are regularly made up in the relationship of an inside broadness of the line ribs that is more clear than the external width of the line to some degree. This draws in the Slip on ribs to genuinely slip over the line. METALICA FORGING INC.

Slip on pipe spines are joined, all around both outside and inside, to offer quality and stop spillage. Slip on pipe ribs can sometimes additionally have a ring/chief or a state of association, and can be made up by systems for a drag to run well with either chamber or line. Then, center line spines and ring channel ribs are both seen as slip on pipe ribs, for the clarification that them two slip over the line.

We proffer slip-on pipe spines that are being made managing everything relationship to relationship in a degree of tries including power time, shipbuilding, petrochemical plants, squander water treatment plants, oil dealing with plants, paper creation lines, turnkey endeavors and drug plants among others.

Mercury Piping Solutions is Manufacturers and Suppliers of Slip on Flanges. We carefully clung to ANSI/ASME B16.9 making models. These spines are essentially outfitted with a raised face. These Flanges contain a ring which is made plans to a line end. This line end interfaces with the spine face inside some bundle; such a methodology grants applying weld address the insider segment over.

Lower material cost with direct game-plan makes Slip on Flanges unavoidable stood separated from weld neck rib. Decisively when Type B or Type C stub closes are utilized, Slip on Flanges can be changed over into a lap joint spines. A hint of the measures are API-605, MSS SP44, ANSI B16.47 Series An and B, ANSI B16.5, ASA, EN1092, BS 4504, DIN.

The figured quality from a Slip On spine under inside weight is of the referencing of 66% that of Welding Neck ribs, and their life under fatigue is around 33% that of the last referred to.

The relationship with the line is finished with 2 filet welds, too at the outside as besides at inside the spine. The X measure on the picture, are for the most part: Divider thickness of line + 3 mm. This space is principal, to don't hurt the spine go standing up to, amidst the welding method.

An adjusting action of the spine is, that norm for each condition genuinely off the bat a line must be welded and after that lone a fitting. A mix of spine and elbow or rib and tee is inconceivable, considering the way wherein that named fittings have not a straight end, that entire slid in the Slip On rib.

Slip on Flanges Specifications:

Standards: ANSI B16.47 Series A & B, ANSI B16.5, API-605, MSS SP44, ASA, EN1092, BS 4504, DIN
Type: Slip on Flanges / SORF
Size:  ½” (15 NB) to 48″ (1200NB)
Class : 150 Class, 300 Class, 400 Class, 600 Class, 900 Class, 1500 Class, 2500 Class, PN6, PN10, PN16, PN25, PN40, PN64 etc.
Material: Stainless Steel, Duplex, Super Duplex, Nickel Alloys, Alloy Steel, Carbon Steel, Low temperature Steel
Material Grade:
Stainless Steel Slip on Flanges:  ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L
Duplex & Super Duplex Steel Slip on Flanges: ASTM A182 / ASME SA182, F 44, F 45, F51, F 53, F 55, F 60, F 61
Carbon Steel Slip on Flanges: ASTM A105 / ASME SA105, ASTM A350 / ASME SA350, ASTM A181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F70
Low Temperature Carbon Steel Slip on Flange (LTCS SORF): Flange, A350 LF2/A350 LF3
Alloy Steel Slip on Flanges:  ASTM A182 / ASME SA182 & A387 F1, F5, F9, F11, F12, F22, F91
Nickel Alloy Slip on Flanges:  ASTM / ASME SB 564 / 160 / 472, UNS 2200 ( Nickel 200 ), UNS 2201 (Nickel 201 ), UNS 4400 (Monel 400 ), UNS 8020 ( Alloy 20 / 20 CB 3, UNS 8825 Inconel (825), UNS 6600 (Inconel 600 ), UNS 6601 ( Inconel 601 ), UNS 6625 (Inconel 625), UNS 10276 ( Hastelloy C 276 )

MATERIAL GRADE of Slip on Flanges

Stainless Steel Slip on Flanges –  ASTM A 182, A 240 F 304, 304L, 304H, 316, 316L, 316Ti, 310, 310S, 321, 321H, 317, 347, 347H, 904L

Duplex Steel Slip on Flanges –  ASTM / ASME A/SA 182 F 44, F 45, F51, F 53, F 55, F 60, F 61

Carbon Steel Slip on Flanges –   ASTM / ASME A/SA 105 ASTM / ASME A 350 , ASTM A 181 LF 2 / A516 Gr.70 A36, A694 F42, F46, F52, F60, F65, F706

Low Temperature Carbon Steel Slip on Flanges –  ASTM A350, LF2, LF3

Copper Alloy Slip on Flanges –  ASTM SB 61 , SB62 , SB151 , SB152 UNS No. C 70600 (Cu-Ni 90/10), C 71500 (Cu-Ni 70/30), UNS No. C 10100, 10200, 10300, 10800, 12000, 12200

Alloy Steel Slip on Flanges –  ASTM / ASME A/SA 182 & A 387 F1, F5, F9, F11, F12, F22, F91

Nickel Alloy Slip on Flanges –  ASTM SB564, SB160, SB472, SB162 Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Monel 400 (UNS No. N04400), Monel 500 (UNS No. N05500), Inconel 800 (UNS No. N08800), Inconel 825 (UNS No. N08825), Inconel 600 (UNS No. N06600), Inconel 625 (UNS No. N06625), Inconel 601 (UNS No. N06601), Hastelloy C 276 (UNS No. N10276), Alloy 20 (UNS No. N08020)

SOME OF ITS APPLICATIONS ARE :

Petrochemical plants
Control time
Oil refineries
Paper industrial facilities
Misuse water treatment plants
Shipbuilding
Turnkey exercises
Pharmaceutical plants

 

Domestic Area

Our Export