Inconel Alloy 600/601/625/718 Pipes & Tubes, Inconel Alloy 600/601/625/718 Pipes & Tubes Manufacturers, Inconel Alloy 600/601/625/718 Pipes & Tubes Suppliers, Inconel Alloy 600/601/625/718 Pipes & Tubes Importers, Inconel Alloy 600/601/625/718 Pipes & Tubes Exporters, Inconel Alloy 600/601/625/718 Pipes & Tubes Stockists.
Inconel Alloy 600/601/625/718 Pipes & Tubes in Mumbai, Inconel Alloy 600/601/625/718 Pipes & Tubes Manufacturers in Mumbai, Inconel Alloy 600/601/625/718 Pipes & Tubes Suppliers in Mumbai, Inconel Alloy 600/601/625/718 Pipes & Tubes Importers in Mumbai, Inconel Alloy 600/601/625/718 Pipes & Tubes Exporters in Mumbai, Inconel Alloy 600/601/625/718 Pipes & Tubes Stockists in Mumbai.
Inconel Alloy 600/601/625/718 Pipes & Tubes in India, Inconel Alloy 600/601/625/718 Pipes & Tubes Manufacturers in India, Inconel Alloy 600/601/625/718 Pipes & Tubes Suppliers in India, Inconel Alloy 600/601/625/718 Pipes & Tubes Importers in India, Inconel Alloy 600/601/625/718 Pipes & Tubes Exporters in India, Inconel Alloy 600/601/625/718 Pipes & Tubes Stockists in India.
Inconel Alloy 600/601/625/718 Pipes & Tubes:
Mercury Piping Solutions is a lofty affiliation that is commonly busy with offering a broad assortment of Inconel 600/601/625/718 Pipes and Tubes. These UNS N06600/N06601/N06625 Pipes and Tubes hold quality over a wide temperature go, striking for high-temperature limits where steel and aluminum would regard creep considering thermally initiated valuable stone opening.
WNR 2.4816/2.4851/2.4856 Pipes and Tubes is fundamental in gas turbine edges, seals, and combustors, and likewise turbo charger rotors and seals, electric submersible well siphon motor shafts, high temperature locks, and so on. As a maker, provider, stockiest and exporter, we offer these Inconel Alloy 600/601/625 Pipes and Tubes in exceptionally created sizes and thicknesses, as indicated by the exact solicitations of our respected clients. We offer the equivalent in worldwide and national nature of rules at down to earth rates to our supporters.
Inconel Alloy 600/601/625/718 Pipes & Tubes Specifications:
| Grade | UNS N06600/01/25, UNS NO7718 |
|---|---|
| Size | ½”NB – 24”NB |
| Schedule | SCH 10 – SCH XXS |
| Type | Seamless / ERW / Welded / Fabricated / LSAW Pipes |
| Standards | ASME SB-167 ASME SB-829 ASME SB-775 ASME SB-725 |
| End | Plain End, Beveled End, Threaded |
| Length | Single Random, Double Random & Cut Length. |
| Form | Round, Square, Rectangular, Hydraulic Etc. |
Chemical Composition of Inconel Alloy 600/601/625/718 Pipes & Tubes
| Grade | Ni | Fe | C | Mn | Si | Cu | Cr | S | Mo | Co | Al | Ti |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 600 | 72.0 min | 6.0 - 10.0 | 0.15 | 1.0 | 0.5 | 0.5 | 14.0 - 17.0 | 0.015 | - | - | - | - |
| 601 | 58.0 – 63.0 | Balance | 0.10 | 1.0 | 0.50 | 1.0 | 21.0 – 25.0 | 0.015 | 8.0-10.0 | - | 1.0 – 1.7 | - |
| 625 | Remainder | 5.0 | 0.10 | 8.0-10.0 | 0.50 | - | 20.00-30.00 | 0.015 | 8.0-10.0 | 1.0 | 0.40 | 0.40 |
| 718 | 50.00-55.00 | Remainder | 0.08 | 0.35 | 0.35 | 0.30 | 17.00-21.00 | 0.015 | 2.80-3.30 | - | 0.20-0.80 | 0.65-1.15 |
Mechanical Properties of Inconel Alloy 600/601/718 Pipes & Tubes
| Grade | Tensile (psi) | .2% Yield (psi) | Elongation (%) |
|---|---|---|---|
| 600 | 95,000 | 45,000 | 40 |
| 601 | 80,000 | 30,000 | 35 |
| 718 | 180,000 | 150,000 | 12(min) |
Mechanical Properties of Inconel Alloy 625 Pipes And Tubes
| Temp° F | Tensile (psi) | .2% Yield (psi) | Elongation in 2 “ (%) |
|---|---|---|---|
| 70 | 144,000 | 84,000 | 44 |
| 400 | 134,000 | 66,000 | 45 |
| 600 | 132,000 | 63,000 | 42.5 |
| 800 | 131,500 | 61,000 | 45 |
| 1000 | 130,000 | 60,500 | 48 |
| 1200 | 119,000 | 60,000 | 34 |
| 1400 | 78,000 | 58,500 | 59 |
| 1600 | 40,000 | 39,000 | 117 |
Physical Properties of Inconel Alloy 600 Pipes And Tubes
| Density | 8.47 g/cm3 |
|---|---|
| Melting Point | 1413 °C (2580 °F) |
Physical Properties of Inconel Alloy 601 Pipes And Tubes
| Density | 8.1 g/cm cube |
|---|---|
| Specific Heat | 461 J/kg K |
| Electrical Resistivity | 119 micro ohms cm |
| Curie Temperature | -190 C |
| Melting Range | 1320 - 1370 C |
| Thermal Expansion(10-6K) | 14.9 (20-300 C) |
Physical Properties of Inconel Alloy 625 Pipes And Tubes
| Density (Kg.m-1) | 84.4 |
|---|---|
| Magnetic Permeability (20°C) | <1.001 |
| Curie Temperature (°C) | -160 |
| Young’s Modulus (N/mm2) | 205 x 10 |
| Specific Heat, 20°C (J.Kg-1.°K-1) | 410 |
| Specific Electrical Resistance, 20°C (?O.m) | 1.29 |
| Thermal conductivity,20°C (W.m-1.°K-1) | 9.9 |
| Mean coefficient of thermal expansion, 20-100°C (°K-1) | 12.8 x 10 |
Physical Properties of Inconel Alloy 718 Pipes And Tubes
| Solution Treated | Solution Treated and Aged | |
|---|---|---|
| Density | 0.296 lb/in3 (8.192 g/cm3) | 0.297 lb/in3 (8.22 g/cm3) |
| Specific Gravity | 8.19 | 8.22 |
| Melting Range | 2500-2600°F | 1370-1430°C |