Incoloy 800/800h/825 Round Bars, Incoloy 800/800h/825 Round Bars Manufacturers, Incoloy 800/800h/825 Round Bars Suppliers, Incoloy 800/800h/825 Round Bars Importers, Incoloy 800/800h/825 Round Bars Exporters, Incoloy 800/800h/825 Round Bars Stockists.
Incoloy 800/800h/825 Round Bars in Mumbai, Incoloy 800/800h/825 Round Bars Manufacturers in Mumbai, Incoloy 800/800h/825 Round Bars Suppliers in Mumbai, Incoloy 800/800h/825 Round Bars Importers in Mumbai, Incoloy 800/800h/825 Round Bars Exporters in Mumbai, Incoloy 800/800h/825 Round Bars Stockists in Mumbai.
Incoloy 800/800h/825 Round Bars in India, Incoloy 800/800h/825 Round Bars Manufacturers in India, Incoloy 800/800h/825 Round Bars Suppliers in India, Incoloy 800/800h/825 Round Bars Importers in India, Incoloy 800/800h/825 Round Bars Exporters in India, Incoloy 800/800h/825 Round Bars Stockists in India.
Incoloy 800/800h/825 Round Bars
Mercury Piping Solutions Driven by in actuality pushed workplaces at our ultra-propelled gathering unit, we are presenting an expansive extent of Incoloy Alloy 800/800HT/825 Round Bars and Rods. Our offered degree is completely made by our skilled specialists by making usage of front line development and quality tried in consistence with set general gauges.
Incoloy Alloy 800/800HT/825 Round Bars and Rods are used for a couple of uses, for instance, in Equipment for Heat-Treating; Hydrocarbon parting; Pressure vessels and warmth exchangers; to say the very least. As a maker, provider, stockiest and exporter, we offer these UNS N08800/11/25 Round Bars and Rods in uncommonly planned sizes and thicknesses as indicated by the cautious solicitations of our respected clients. We offer these Incoloy Alloy 800/800HT/825 Round Bars and Rods in worldwide and national nature of benchmarks at sagacious rates to our supporters..
Incoloy 800/800h/825 Round Bars Specifications:
| Standard | ASTM / ASME SB 166, ASTM / ASME B 446 , ASTM / ASME B 637, ASTM B 511, ASTM B 408 |
|---|---|
| Grade | Incoloy 800 (UNS N08800) Incoloy 800H (UNS N08810) Incoloy 800HT (UNS N08811) Incoloy 825(UNS N08825). |
| Range | 5MM DIA - 500MM DIA |
| Length | 100MM - 6000MM |
| Finish | Bright, Polish & Black |
| Form | Round, Square, Hex (A/F), Rectangle, Wire (Coil Form), Wire-mesh, Billet, Ingot, Forging Etc |
Chemical Composition of Incoloy 800/800h/825 Round Bars
| Incoloy | 800 | 800H | 825 |
|---|---|---|---|
| Ni | 30-35 | 30-35 | 38.0 – 46.0 |
| Fe | 39.5 min | 39.5 min | 22.0 min |
| Cr | 19-23 | 19-23 | 19.5 - 23.5 |
| Cu | 0.75 max | 0.75 max | 1.5 - 3.0 |
| Ti | 0.15-0.60 | 0.15-0.60 | 0.6 - 1.2 |
| Al | 0.15-0.60 | 0.15-0.60 | 0.2 max |
| C | 0.1 max | 0.05-0.1 | 0.05 max |
| Mn | 1.5 max | 1.5 max | 1.0 max |
| S | 0.015 max | 0.015 max | 0.015 max |
| Si | 1.0 max | 1.0 max | 0.5 max |
| Mb | - | - | 2.5 - 3.5 |
Mechanical Properties of Incoloy 800/800h/825 Round Bars
| Inconel 800/800HT | |
|---|---|
| Tensile Strength | Psi – 75,000 , MPa – 520 |
| Yield Strength (0.2%Offset) | Psi – 30,000 , MPa –205 |
| Elongation | 30 % |
| Inconel 825 | |
| Tensile Strength | Psi – 80,000 , MPa – 550 |
| Yield Strength (0.2%Offset) | Psi – 32,000 , MPa –220 |
| Elongation | 30 % |
Physical Properties of Incoloy 800/800h Round Bar
| Density lbm/in3 |
Thermal Conductivity (BTU/h ft. °F) |
Electrical Resistivity (in x 10-6) |
Modulus of Elasticity (psi x 106 |
Coefficient of Thermal Expansion (in/in)/ °F x 10-6 |
Specific Heat (BTU/lb/ °F) |
Melting Range (°F) |
|---|---|---|---|---|---|---|
| at 68°F: 0.285 | 9.4 at 212°F | 28.3 at 68°F | 28 | 9.4 at 32 – 212°F | 0.1200 at 68°F to 212°F | 2500 to 2590 |
| 12.4 at 932 °F | 39.4 at 752°F | 10.2 at 32 – 1000°F | ||||
| 49.6 at 1652 °F | 10.4 at 32 – 1500°F |
Physical Properties of Incoloy 825 Round Bars
| Density | 8.14 g/cm3 |
|---|---|
| Melting Point | 1400 °C (2550 °F) |